Fuji Xerox ApeosPort Print C5570 Reference Manual page 280

Setting
Blank-page ejection
Note

This setting is not
applied by extension
commands sent from
users.
Character range
Image Enhancement
Text quality
Reduced Text
Char. Code Table
Page length
1 Inch Skip
Feed Position
Text by country
280
11 Appendix
Item No.
ESC PCL HP
51 - -
52 - -
53 213 163
55 - -
56 - -
57 - -
58 - -
59 - -
60 - -
- - -
Setting value
[0] (Default): Off
[1]: On
Note

Configure the ejection of white paper of blank pages.
 If the setting is configured to [No], blank pages are not
created by 2 Up printing or 2-sided printing.

Pages that have spaces entered with external characters or
white objects will be printed as blank pages even when this is
configured to [Off].
[0] (Default): Standard
[1]: Extended
Note

Sets whether or not to extend the position of the right
margin.
 When the right margin is set by a command, the position
specified by the command will be the right edge.
[0]: OFF
[1] (Default): ON
[0] (Default): High quality
[1]: Draft
[0] (Default): Off
[1]: On
Note
 You can reduce the size of characters when printing half-
width alphanumeric characters.
[0] (Default): Katakana
[1]: Enhanced graphics
Note

Configure the type of the code table for printing half-width
alphanumeric characters.
 Configure the character code to Katakana when using an
application from Japan and Enhanced graphics when using
an application from outside Japan.
[0] (Default): 11 inches
[1]: 12 inches
[0] (Default): Off
[1]: On
Note
 Configure whether to leave a 1-inch space between pages.

The setting is turned on only when [No cut sheet feeder] is
configured for [Paper Position].
[0] (Default): 8.5 mm
[1]: 22 mm
[0] (Default): Japan
[1]: US
[2]: UK
[3]: Germany
[4]: Sweden