Internet/Intranet Connection Problems; Wireless Lan Connection Trouble - Fuji Xerox ApeosPort Print C5570 Reference Manual

Internet/Intranet Connection Problems

When connection to the Internet/Intranet
fails
Cannot connect to the target web server

Wireless LAN Connection Trouble

Cannot connect via wireless LAN.
Cannot connect to wireless LAN using WPS
Cannot connect to wireless LAN using WPS-
PBC (push button method)
224
9 Troubleshooting
Symptom
Symptom
Confirm the IP address.
Set the correct IP gateway address when connecting to the proxy
server, or to a Web server via the IP gateway.
Confirm the DNS server address.
The settings of an address not to use a proxy are incorrect. Make
sure that only addresses that do not use a proxy have been
specified.
Note that if the IP address is specified directly, and the server is
being accessed, the registered server is not subject to exclusion,
even when an address that does not use a proxy has been specified
in FQDN format. Specify even an IP address for an address that
does not use a proxy.
Similarly, if the server is accessed by the FQDN format, the
registered server is not subject to exclusion, even when an IP
address has been specified directly, and an address that does not
use a proxy has been specified. Specify even using FDQN format for
an address that does not use a proxy.
It is not possible to connect to the target web server if the settings
are not configured to use a proxy server in an environment that
uses a proxy. Configure the settings to use a proxy server.
Do not configure settings to use a proxy server in an environment
that does not require a proxy, such as when connecting to an
intranet.
It is not possible to connect to the target web server if the address
of the proxy server was not configured correctly when the settings
to use a proxy server were configured. Configure the proxy server
address correctly.
Configure the user name and password on this machine to allow
connection to the proxy server.
Make sure that [Wireless LAN Settings] is turned on.
The communication with the machine may be terminated by the
firewall on the computer. Disable the firewall on the computer.
Confirm that the security setting of the access point is set to WPA
or WPA 2. WEP is not supported by WPS.
Press the WPS button on the access point within 2 minutes after the
WPS operation is performed on the machine.
Refer
 For details on the operation of the wireless LAN access point, refer to
the manual provided with the wireless LAN access point.
Cause/Remedy
Cause/Remedy