Fuji Xerox ApeosPort Print C5570 Reference Manual page 197

1.
Tap the display area of authentication information at the top left of the Home screen, and then login as a
machine administrator.
2.
Tap [Device].
3.
Tap [Maintenance] > [Image Quality].
4.
Tap [Adj Image Transfer].
5.
Tap [Enter Sample Number and Adjust].
6.
Choose the paper type to be adjusted from [Paper Type], and then tap [2 Sided Printing].
7.
From [Paper Size], choose the size of paper to be loaded in Tray 5 (Bypass).
8.
Load paper of the type and size selected for Tray 5 (Bypass).
9.
Tap [Print Sample].
The following sample is printed.
Note
 "Side1" and "Side2" are printed at the top right of the sample on the front and back side, respectively.
 When the paper size is A4, B4, or 8.5 × 11", the sample is printed over two pages.
10.
After printing is finished, tap [Close].
8.2 Image Quality
197