Star Hub Alarm Reporting - Nortel DMS-100 Series Maintenance Manual

7-8 Star Remote System manual maintenance
Table 7-7 Power converter full configuration unit status (Sheet 2 of 2)
Power Power
convertor in converter in
slot 3 slot 20
Failed Failed
Installed Installed
Failed Installed
Installed Failed
Failed Installed
Installed Failed
Failed Installed
Installed Failed
Installed Installed
Installed Installed
ILD-R alarms
The ISDN line drawer for remotes (ILD-R) does not generate any alarms. As
a result of ILD-R failure or problems, the ILD-R either goes into ISTb or SysB
states. This, in turn, causes the STAR level to generate an alarm. The
QUERYPM FLT command at the ILD MAP level indicates what problems are
causing the alarm.

Star Hub alarm reporting

Each UMP card supports twelve scan (SC) points and eight SD points that are
user-defined. In addition, three SD points and four SC points are hardcoded
for activating the critical, major, and minor lamps on the FSP dc front panel,
detecting major and critical failures. Minor alarms do not have scan points for
software to detect since hardware never activates a minor alarm.
297-8353-550 Standard 05.01 March 2001
Power Power
convertor in converter in
slot 5 slot 18
Installed Installed
Failed Failed
Installed Failed
Failed Installed
Failed Installed
Installed Failed
Installed Installed
Installed Installed
Failed Installed
Installed Failed
RTS activity RTS activity
for unit 0 for unit 1
RTS failed RTS failed
RTS passed, RTS passed,
ISTb ISTb
RTS passed, RTS passed,
ISTb ISTb
RTS passed, RTS passed,
ISTb ISTb
RTS passed, RTS passed,
ISTb InSv
RTS passed, RTS passed,
InSv ISTb
RTS passed, RTS passed,
ISTb InSv
RTS passed, RTS passed,
InSv ISTb
RTS passed, RTS passed,
ISTb InSv
RTS passed, RTS passed,
InSv ISTb