Maintenance Commands; Alarm Commands; Boot Commands - Nortel DMS-10 Series Quick Reference Manual

Maintenance Commands

Alarm Commands

Command Name
ERRMAP Displays a list of available alarms with
active alarms noted on the active processor.
DOS S ERRMAP Displays a list of available alarms with
active alarms noted on the standby proces-
sor.
ERRMAP ALARMS Displays a list of active alarms on active and
standby processors.
ERRMAP ee ttttttt l Changes specified alarm parameters.
ee
ttttttt - Alarm type: INHIBIT, MINOR,
l
Note: Use the SITDAT WRITE command to save modified alarm
parameters to disk.
RSERR nn Resets alarms on the active processor.
nn - event # or 00 for all active side alarms.
DOS S RSERR nn Resets alarms on the standby processor.
nn - event # or 00 for all standby side

Boot Commands

Command Name
DOS LA xxxxxx yy
DOS LB
DOS LD
DOS LL
DOS S DOS LB
Explanation
- Event #: 1-99
MAJOR, and CRITICAL
- level of alarm: 0-3.
alarms.
Explanation
Appends a program name to boot list.
xxxxxx - program name
yy - program version on disk.
Loads program files listed in the boot
file to active processor.
Deletes the last file name in boot file.
Lists the contents of the boot file.
Loads program files listed in the boot
file to standby processor.
BMC II AMAT Quick Reference Guide
7