and press the Enter key.
26
To load the STAR unit, type
>LOADPM UNIT star_unit CC
and press the Enter key.
where
star_unit
is the STAR unit to be loaded (0 or 1)
If
load fails
load passes
27
Send any faulty cards for repair according to local procedure.
28
Record the following items in office records:
•
date the card was replaced
•
serial number of the card
•
indications that prompted replacement of the card
Go to step 31.
29
Get additional help replacing this card by contacting the personnel
responsible for a higher level of support.
30
Consult office personnel to determine why the component is offline. Continue
as directed by office personnel.
31
You have correctly completed this procedure.
Star Remote System card replacement procedures
DMS-100 Family NA100 Star Remote System XPM15 and up
in a STAR
Do
step 29
step 9
12-183
NTTR77
(end)