Nortel DMS-100 Series Maintenance Manual page 192

6-32 Star Remote System user interface
Table 6-14 LTP level commands (Sheet 2 of 2)
Command
BSY
RTS
DIAG
ALMSTAT
CKTLOC
HOLD
NEXT
FULLDN
PREFIX
LCO
LEVEL
LTPRSRC
(non-menu)
FRLS (non-menu)
RECORD_DTSR
(non-menu)
EBSMSG
(non-menu)
297-8353-550 Standard 05.01 March 2001
Line types Description
All Busies the line in the control
position.
All Returns the line in the control
position to idle.
All Invokes the long diagnostic series of
end-to-end signaling and
transmission tests.
All Displays status of the LNS
subsystem and allows the user to
change thresholds.
All Identifies the line circuit in the
control position and displays its
attributes.
All Places line in the control position to
the hold position.
All Places the next line in the posted set
in the control position.
All Displays the full national number.
All Sets or changes prefix digits.
None Operates or releases the cutoff relay
in the line circuit.
All Accesses another LTP level.
All Excludes or includes users or
display information from the LTP
resource release mechanism.
All Forcibly disconnects the line circuit
from test equipment (or another
circuit) and changes the line state to
manually busy (MB).
All Enables, disables, or queries dial
tone speed recording.
P-Phone Enables or disables the EBS
warning message and prompt.
Configuration notes
Not applicable
Not applicable
Refer to the "Line
diagnostics functionality
for POTS and P-phone"
table in the next section.
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Not supported
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable