Nortel DMS-100 Series Maintenance Manual page 479

l The RLD is now powered up.
12 Close and secure the TSS cover using the two screws on the left side of the
TSS. Close and lock the cabinet door.
At the MAP terminal
13 To return the RLD to service, type
>RTS DRWR
and press the Enter key.
If the RTS
passes
fails
14 Send any faulty cards for repair according to local procedure.
15 Record the following items in office records:
• date the card was replaced
• serial number of the card
• problems that prompted replacement of the card
Go to step 17.
16 Get additional support in replacing this card by contacting operating company
personnel responsible for a higher level of support.
17 You have correctly completed this procedure. Return to the maintenance
procedure that directed you to this card replacement procedure and continue
as directed.
Star Remote System card replacement procedures
DMS-100 Family NA100 Star Remote System XPM15 and up
in an RLD
Do
step 14
step 16
12-131
NTTR67
(end)