At the MAP terminal
6
To test the line card just replaced, type
>DIAG
and press the Enter key.
If DIAG
passes
fails
7
To return the line card to service, type
>RTS
and press the Enter key.
If RTS
passes
fails
8
Send any faulty cards for repair according to local procedure.
9
Record the following items in office records:
•
date the card was replaced
•
serial number of the card
•
indications that prompted replacement of the card
Go to step 11.
10
Get additional help in replacing this card by contacting the personnel
responsible for a higher level of support.
11
You have correctly completed this procedure.
Star Remote System card replacement procedures
DMS-100 Family NA100 Star Remote System XPM15 and up
in a STAR or RLD
Do
step 7
step 10
Do
step 8
step 10
12-13
NT6X19
(end)