Nortel DMS-100 Series Maintenance Manual page 365

At the MAP terminal
6 To test the line card just replaced, type
>DIAG
and press the Enter key.
If DIAG
passes
fails
7 To return the line card to service, type
>RTS
and press the Enter key.
If RTS
passes
fails
8 Send any faulty cards for repair according to local procedure.
9 Record the following items in office records:
• date the card was replaced
• serial number of the card
• indications that prompted replacement of the card
Go to step 11.
10 Get additional help in replacing this card by contacting the personnel
responsible for a higher level of support.
11 You have correctly completed this procedure.
Star Remote System card replacement procedures
DMS-100 Family NA100 Star Remote System XPM15 and up
in a STAR or RLD
Do
step 7
step 10
Do
step 8
step 10
12-17
NT6X20
(end)