Nortel DMS-100 Series Maintenance Manual page 117

changed. Call processing may be possible. For this reason, the drawer
state is updated to ISTb at the MAP display, but the drawer is not prevented
from handling call processing. The RCP/BIC looparound tests the PCM
path by sending test patterns to the BIC. The patterns received by the
transmit time switch are expected to be the same within a set timeout
period.
The list of full InSv tests follows:
• ACTIVITY_READ
• MSG_LOOPAROUND
• ANI_COIN_FAIL
• PARITY_TRAP_FAIL
• BIC_ACT_TEST
• POWER_CONVERTER_FAIL
• BIC_CM_TEST
• RINGING_FAIL
• BIC_INHIBIT_TEST
• RTM_CM_TEST
• BIC_LA_TEST
• RTTS_CM_TEST
• BIC_LOOPAROUND
• SANITY_TIMEOUT_FAIL
• BIC_SCAN_TEST
• SET_MSG_LOOPAROUND
• DCC_LA_TEST
• SUBCYCLE_LENGTH_FAIL
• DS1_LOOPAROUND
• SUBCYCLE_ORDER_FAIL
• IUC_LA_TEST
• TIMING_TEST
• LC_COM_TEST
• WRITE_PROTECT_FAIL
• ZERO_CROSSING_INT_FAST_FAIL
Star Remote System automatic maintenance 4-17
DMS-100 Family NA100 Star Remote System XPM15 and up