Querypm Command - Nortel DMS-100 Series Maintenance Manual

6-14 Star Remote System user interface
Table 6-6 Overview of ILD commands (Sheet 2 of 2)
Command Function
QILD New
QSCONN Changed

QUERYPM command

When the QUERYPM command is entered without parameters, the following
ILD-R information is displayed:
•
•
•
297-8353-550 Standard 05.01 March 2001
Description
This nonmenu command displays all the D-packet switching
logical terminal identifiers (LTID) that are mapped into a
given ILDR's Bd-channels. This command can request a
certain Bd-channel if one is selected, or request information
of both ILDR's Bd-channels.
This nonmenu command displays SPECCONN endpoints
and segments, depending on the command's parameter. A
new option, ILDCHNL, is added to the QSCONN SEG
command.
ILD-R name, node, and internal number
loadname
ILD-R status and physical location