Nortel DMS-100 Series Maintenance Manual page 591

Star Remote System routine maintenance procedures
Low temperature alarm test
At the SRMO and SRME +site
1 Select and activate the low-temperature alarm by blowing coolant on the
low-temperature sensor. The low temperature sensor is in the dc panel.
2 Check that the alarm generates.
If the alarm
generates
does not generate
3 Contact your maintenance support group.
4 You have correctly completed this procedure.
Low temperature alarm test
DMS-100 Family NA100 Star Remote System XPM15 and up
SRMO and SRME
Do
step 4
step 3
13-33
(end)