Nortel DMS-100 Series Maintenance Manual page 186

6-26 Star Remote System user interface
The RLDCarr level commands for the Star Module are listed in alphabetical
order in the following table.
Table 6-10 Overview of RLDCarr commands
Command Function
POST Post
QUIT Quit
TRNSL Translate
The RLDCarr;POST level commands for the Star Module are listed in
alphabetical order in the following table.
Table 6-11 Overview of RLDCarr;POST commands (Sheet 1 of 2)
Command Function
BSY Busy
DISPOPT Display option
NEXT Next
OFFL Offline
QUIT Quit
POST Post
RTS Return to service
297-8353-550 Standard 05.01 March 2001
Description
Displays RLD C-side carriers based on the state,
maintenance limit or out-of-service limit, ALL, or an RLD
number. When an RLD is posted, the system changes to the
POST level.
Quits the current level and returns to RLD level.
Displays the carrier status, message condition, port number
on the Star Hub, port number on the Star Module, and the
master Hub unit for all (up to 32) P-side DS-1 links of a
specified Star Hub.
Description
Busies a specified carrier or carriers in a posted set. A
message displays, warning the Bsy command changes the
RLD state.
Displays all maintenance attributes of the specified carrier
(information from table CARRMTC).
Posts the next RLD in a posted set or displays the next
screen of the set.
Sets a busied carrier to the Offl state.
Quits the current level and returns to RLD level.
Displays RLD C-side carriers based on the state,
maintenance limit or out-of-service limit, ALL, or an RLD
number.
Returns a posted carrier to service.