Troubleshooting authentication
Use vendor documentation to obtain settings display.
Configuring RADIUS
About this task
Reconfigure the RADIUS server with the correct VLAN information.
Use vendor documentation to make the required changes.
Prerequisites
Three attributes exist that the RADIUS server sends back to the NAS(switch) for RADIUS
assigned VLANs. The attributes are the same for all RADIUS vendors:
• Tunnel-Medium-Type – 802
• Tunnel-Pvt-Group-ID – <VLAN ID>
• Tunnel-Type – Virtual LANs (VLAN)
Configure switch
The VLAN must be configured correctly on the ERS 5600 series device.
Task flow: Configure switch
The following task flows assist you to configure the VLAN on the device.
88
Troubleshooting
Comments? infodev@avaya.com
December 2013