Avaya 5000 Series Troubleshooting Manual page 124

Troubleshooting authentication
2. Verify that no error or warning messages display.
Enabling use RADIUS to authenticate Non-EAPOL clients
About this task
Enable authentication using Radius Server for Non-EAP clients.
Procedure
1. Use the eapol multihost RADIUS-non-eap-enabled command to enable
2. Verify that no error or warning messages display.
Configuring a Non-EAPOL RADIUS password
About this task
Configure a password for use with Radius authentication for Non-EAPOL clients.
Procedure
1. Use the eapol multihost non-eap-pwd-fmt [ip-aadr|mac-addr|
2. Verify that no error or warning messages display.
Displaying EAPOL multihost interface
About this task
Obtain the details for EAPOL multihost interface settings.
Procedure
1. Use the show eapol multihost interface <port> command to display
2. Verify the following:
124 Troubleshooting
authentication using a Radius Server for Non-EAPOL clients.
port-number] command to configure the password used in Radius
authentication.
EAPOL multihost settings.
• Multihost on interface is enabled.
• Allow Non-EAP clients on interface is enabled.
Comments? infodev@avaya.com
December 2013