Connecting Stacking Cables; Powering On Unit; Returning Unit For Repair - Avaya 5000 Series Troubleshooting Manual

Connecting stacking cables

About this task
Reconnect the stacking cables to correctly stack the device.
Procedure
1. Review the stacking section in Getting Started with Avaya Ethernet Routing Switch
2. Connect the cables in accordance with physical stack requirements.

Powering on unit

About this task
Energize the unit once it is connected and ready to integrate.
No requirement exists to reset the entire stack. The single device being replaced will be the
only device having such action placed on it.
Procedure
1. Connect the power to the unit.
2. Allow time for the new unit to join the stack. The configuration of the failed unit to
3. Confirm that the new unit has reset itself. This will confirm that replication has

Returning unit for repair

About this task
Return unit to Avaya for repair.
Contact Avaya for return instructions and RMA information.
Troubleshooting
5000 Series, NN47200–303 for cabling details.
be replicated on the new unit.
completed.
Returning unit for repair
December 2013 59