Installing The Switch In An Equipment Rack; About This Task; Before You Begin - Avaya 4900 Series Installation Job Aid

Country / Plug Specification
United States of America / Canada / Japan:
• NEMA5-15P male plug
• UL-recognized (UL stamped on cord
jacket)
• CSA-certified (CSA label secured to the
cord)
United Kingdom:
• BS1363 male plug with fuse
• Harmonized cord
Australia:
• AS3112-1981 male plug

Installing the switch in an equipment rack

Note:
The instructions in this section apply to all switches in Avaya Ethernet Routing Switch 4900
Series.

About this task

Install the switch in an equipment rack.

Before you begin

Tool requirements
• Phillips screwdriver to attach brackets to the switch and the switch to the rack.
Rack requirements
• Space of 2.8 inches (7.1 cm) for each switch is available in an E1A or 1EC standard 19 inch
(48.2 cm) equipment rack and T1A 23 inch (58.5 cm) equipment rack.
• Appropriate rack space is available to accommodate 1U switch height (44 mm).
• Rack is bolted to the floor and braced if necessary.
June 2016 Installation Job Aid for Avaya Ethernet Routing Switch 4900 Series (NN47212-302,
Specifications
• 100 or 120 VAC
• 50 - 60 Hz
• Single Phase
• 240 VAC
• 50 Hz
• Single Phase
• 240 VAC
• 50 Hz
• Single Phase
ver 02.01)
Typical Plug
7