Avaya 5000 Series Troubleshooting Manual page 113

Enabling EAPOL globally and the port EAPOL automatic status
About this task
Make the required changes to ensure the settings are correct.
Procedure
1. Use the eapol enable command to enable EAP globally.
2. Use the eapol status auto command to change the port EAPOL status to
Displaying EAPOL multihost information
About this task
Display the EAPOL Multihost information for review.
Procedure
1. Enter the show eapol port multihost command to display the information.
2. Review the information to verify the following:
Enabling non-EAPOL VoIP phone clients
About this task
Verify that the multihost setting allows non-EAP VoIP phone clients.
Procedure
1. Use the eapol multihost non-eap-phone-enable command to allow NEAP
2. Review the command output for errors.
Troubleshooting
auto.
• Allow Non-EAPOL VoIP Phone Clients: Enabled
Phones.
NEAP phone is not working
December 2013 113