Troubleshooting authentication
Procedure
1. Use the show eapol port <port> command to display the port information.
2. Review the command output and verify the following:
Enabling EAPOL globally
About this task
Enable EAPOL globally for the switch.
Procedure
1. Use the eapol enable command to enable EAPOL globally.
2. Ensure that no error or warning messages display.
Enabling EAPOL UBP globally
About this task
Enable EAPOL UBP globally for the switch.
Procedure
1. Use the eapol user-based-policies enable command to enable EAPOL
2. Verify that no error or warning messages display.
Enabling EAPOL on a port
About this task
Enable EAPOL on a user port.
Procedure
1. Use the eapol port <port> command to enable EAPOL on a port.
122
Troubleshooting
• EAPOL global setting is enabled.
• EAPOL UBP global setting is enabled.
• EAPOL port status is AUTO.
globally.
Comments? infodev@avaya.com
December 2013