Enabling IP Routing globally
About this task
If you determine that IP Routing is disabled, use this procedure to enable IP Routing globally
on the switch.
Procedure
1. Enter the ACLI Global Configuration mode.
2. At the command prompt, type the ip routing enable command to enable IP
Obtain ARP information
Display and compare ARP information using the methods described in this section.
Task flow: Obtaining ARP information
The following task flow and the procedures in this section can help you to obtain ARP
information from ACLI, EDM, and SNMP.
Troubleshooting
Routing.
ARP not forwarding traffic correctly
December 2013
139