Avaya 5000 Series Troubleshooting Manual page 126

Troubleshooting authentication
Displaying EAPOL multihost status
About this task
Obtain the status for an EAPOL multihost interface.
Procedure
1. Use the show eapol multihost status <port> command to display
2. Verify that the user MAC displays.
Verifying RADIUS server and user settings
About this task
Verify that the user and password configured on the Radius Server matches the Non-EAPOL
user MAC and password (created by the switch).
Refer to vendor documentation for the RADIUS server configuration.
Displaying QoS agent
About this task
Obtain details of QoS agent settings.
Procedure
1. Use the show qos agent command to display QoS Agent settings.
2. Verify whether the QoS UBP is set to low or high security.
Changing the QoS agent user based policy security level
About this task
Change UBP level to high or low security to enable QoS UBP globally.
Procedure
1. Use one of the following commands to enable a QoS UBP security level on the
126 Troubleshooting
authenticated MAC addresses on a port.
device:
• qos agent ubp high-security-local
Comments? infodev@avaya.com
December 2013