Avaya 5000 Series Troubleshooting Manual page 156

Troubleshooting layer 2 and layer 3
Procedure
1. At the ACLI command prompt, enter the show ip ospf interface vlan
2. Review the command output to verify the administration state.
Enabling the administration state of the switch
About this task
Use this procedure to enable the administration state of the switch.
Procedure
1. At the ACLI command prompt, enter the ip ospf interface vlan command
2. Review the command output for errors.
Showing IP OSPF
About this task
Use this procedure to determine whether OSPF is globally enabled.
Procedure
1. At the ACLI command prompt, enter the show ip ospf interface vlan
2. Review the command output to determine whether OSPF is globally enabled.
Enabling OSPF globally for the device
About this task
Use this procedure to enable OSPF globally for the device.
Procedure
1. At the ACLI command prompt, enter theip ospf interface vlan <vid>
156 Troubleshooting
command.
to change the admin state.
<vid> command.
command.
Comments? infodev@avaya.com
December 2013