Avaya 5000 Series Troubleshooting Manual page 78

Troubleshooting authentication
Verifying Radius Server and user settings
About this task
This section provides troubleshooting guidelines to verify that the user and password
configured on the RADIUS server matches the user and password used on the user PC.
Procedure
Use vendor procedures to verify the information.
Showing QoS Agent
About this task
Obtain details of the QOS Agent.
Procedure
1. Use the qos agent command to display the QOS agent information.
2. Verify that ubp level is low or high security.
Changing UBP level
About this task
Change UBP level to high or low security to enable QoS UBP globally.
Procedure
1. Use one of the following commands to enable QoS UBP on the device:
2. Verify whether errors are displayed.
78 Troubleshooting
• qos agent ubp high-security-local
• qos agent ubp low-security-local
No error or warning messages should be displayed.
Comments? infodev@avaya.com
December 2013