Avaya 5000 Series Troubleshooting Manual page 200

Troubleshooting layer 2 and layer 3
Procedure
1. At the ACLI command prompt, enter the show spanning-tree port command
2. Review the command output to determine the action required.
Enabling IP routing globally
About this task
Display the IP routing information to determine IP Routing status.
Procedure
1. At the ACLI command prompt, enter the ip routing command to display the
2. If IP routing is not enabled, access the ACLI Global Configuration mode.
3. At the ACLI Global Configuration mode command prompt, enter the ip routing
Displaying VLAN IP details
About this task
You can display the VLAN IP information.
Procedure
At the ACLI command prompt, enter the show vlan ip to display VLAN IP
information.
Testing the IP connection between aggregation switches
About this task
You can test the connectivity between two switches.
Procedure
1. At the ACLI command prompt, enter ping <switch2> from the first switch.
200 Troubleshooting
to display spanning-tree participation for ports.
status of IP routing.
enable command.
Comments? infodev@avaya.com
December 2013