Avaya 5000 Series Troubleshooting Manual page 123

2. Verify that no error or warning messages display.
Displaying EAPOL multihost information
About this task
Obtain the details for EAPOL multihost global settings.
Procedure
1. Use the show eapol multihost command to display EAPOL multihost
2. Verify the following:
Allowing non-EAPOL clients
About this task
Enable processing for non-EAPOL clients.
Procedure
1. Use the eapol multihost allow-non-eap-enabled command to enable
2. Ensure that no error or warning messages display.
Enabling Non-EAP user based policies
About this task
Enable Non-EAP UBP.
Procedure
1. Use the eapol multihost non-eap-user-based-policies enable
Troubleshooting
settings.
• Allow Non-EAP clients is enabled.
• Non-EAP UBP is enabled.
• Use Radius to authenticate Non-EAP clients is enabled.
• Allow Non-EAP clients if Radius Non-EAP password is configured correctly.
Allow Non-EAPOL on the switch.
command to enable Non-EAPOL UBP on the switch.
NEAP user policies from RADIUS not applied
December 2013 123