2. To return to Global Configuration mode, type exit.
3. To return to Privileged Exec mode, type exit.
4. The completely exit ACLI , type logout.
Router Configuration mode
About this task
The Router Configuration command mode prompt appears as: ERS5000(config-
router)#.
Procedure
1. To configure router OSPF, type router ospf.
2. To configure router RIP, type router rip.
3. To configure router VRRP, type router vrrp.
4. To return to Global Configuration command mode, type exit.
5. To return to Privileged EXEC mode, type exit.
6. To completely exit ACLI , type logout.
Troubleshooting
For example, use the interface fastethernet <port number> command
to enter the Interface Configuration mode and configure a port.
Router Configuration mode
December 2013
221