Avaya 5000 Series Troubleshooting Manual page 127

2. Verify that no error or warning messages display.
Displaying QoS user based policy information
About this task
Obtain details of QoS agent UBP settings.
Procedure
1. Use the show qos ubp command to display QoS UBP settings.
2. Verify that the UBP set name matches the UROL string configured on the RADIUS
Creating a user based policy set to apply to an authenticated user port
About this task
Create a user based policy (UBP) set to configure the template policy to apply to the
authenticated user port.
Procedure
1. Use the following commands to create the UBP set:
2. Verify that no error or warning messages display.
Displaying QoS resource use
About this task
Obtain details of QoS resource use.
Procedure
1. Use the show qos diag command to display QoS resource use.
2. Verify the port used for user authentication, as follows:
Troubleshooting
• qos agent ubp low-security-local
server. For example, if the UBP Set is named student then the UROL string sent by
the RADIUS server must be UROLstudent.
a. At the ACLI command prompt, enter qos ubp classifier.
b. At the ACLI command prompt, qos ubp set.
NEAP user policies from RADIUS not applied
December 2013 127