Configure Ecmp - Avaya 5000 Series Troubleshooting Manual

Troubleshooting layer 2 and layer 3
2. Review the command output to ensure that the send and receive options of the

Configure ECMP

If the ECMP value is not properly configured you must set it to the correct value.
Task flow: Configure ECMP
You can use the following task flow to help you set the value of ECMP.
184 Troubleshooting
sending and receiving interfaces match.
If the options do not match, enter the following commands:
• At the VLAN Interface Configuration mode command prompt, enter ip rip
send version notsend/rip1/rip1comp/rip2.
• At the VLAN Interface Configuration mode command prompt, enter ip rip
receive version rip1/rip1orrip2/rip2.
Access the VLAN Interface Configuration mode.
a. At the ACLI User EXEC command prompt, enter enable to access the
Privileged EXEC Configuration mode.
b. At the ACLI Privileged EXEC command prompt, enter configure
terminal to enter the Global Configuration mode.
c. At the ACLI Global Configuration prompt, enter interface vlan <1–
4094>.
Comments? infodev@avaya.com
December 2013