2. Review the command output to verify that the change was made.
Showing IP routing
About this task
Use this procedure to display the IP routing information to verify whether IP Routing is
enabled.
Procedure
1. At the ACLI command prompt, enter the show ip routing command to display
2. Review the command output to verify whether IP routing is enabled.
Showing VLAN IP VID
About this task
Use this procedure to verify that IP Routing is enabled on the interface.
Procedure
1. At the ACLI command prompt, enter the show vlan ip vid <vid> command
2. Review the command output to determine IP Routing status on the interface.
Confirm Adjacencies
In order for OSPF to function correctly, adjacencies between neighbor routers must be
formed.
Task flow: Confirm adjacencies
Use the following task flow to help verify the adjacencies between neighbor routers.
Troubleshooting
the information.
to display the interface IP status.
Failure to establish OSPF adjacency
December 2013
157