Avaya 5000 Series Troubleshooting Manual page 64

Troubleshooting authentication
Getting correct RADIUS server settings for the switch
About this task
This section provides troubleshooting guidelines for obtaining the RADIUS server settings.
Procedure
1. Obtain network information for the RADIUS server from the Planning and
2. Follow vendor documentation to set the RADIUS authentication method MD5.
Viewing RADIUS information
About this task
Review the RADIUS server settings in the device.
The default server port is 1812/UDP. Older servers use 1645/UDP. Some older servers do not
support UDP.
Procedure
1. Use the show RADIUS-server command to view the RADIUS server settings.
2. Refer to the vendor documentation for server configuration.
Configuring the RADIUS server settings
About this task
The RADIUS Server settings are to be correct for the network.
Follow vendor documentation to set the RADIUS server settings.
Resetting the shared secret
About this task
Reset the Shared Secret if it has become corrupted.
Procedure
1. Use the RADIUS-server key command.
64 Troubleshooting
Engineering documentation.
Comments? infodev@avaya.com
December 2013