Bay Mount Rear Cover Kit 849001060; Cable Requirements And Options - Alcatel-Lucent 1850 TSS-60 Installation And System Turn-Up Manual

Physical installation
............................................................................................................................................................................................................................................................
Bay mount rear cover
Figure 2-2 Bay mount rear cover kit 849001060
Note:
Alcatel-Lucent 1850 TSS-60 shelf. This is mounting the shelf on the front of the bay
with 5 inches of the shelf protruding from the front of the bay.
Cabling checklist
This section briefly describes cabling information, including the number of particular
cables required. For information regarding available cable lengths and ordering comcodes,
refer to the tables in this chapter.
Table 2-1, "Cable requirements and options" (p. 2-5)
required number (if any).
Table 2-1 Cable requirements and options
Cable assembly description
Power
1. One -48VA and -48VB main power feeder is required per shelf. The shelf requires the
use of a right angle power connector on each feed.
............................................................................................................................................................................................................................................................
365-372-603R2.0
Issue 1 January 2009
The rear bay cover requires the front mounting configuration of the
lists available cables along with the
Required See note
Yes 1
Planning
2 - 5