............................................................................................................................................................................................................................................................

If a protection circuit pack is required, continue with the

LNW98 Apparatus Blank into the protection circuit pack slot (D2 or G2 as required), then

proceed to

Important!

to provide proper air flow for cooling.

Remove the second LNW16 or LNW19B from the packing material.

Place the circuit pack into the shelf (slot D2 or G2 as required). Do NOT engage the

circuit pack in the backplane connector.

Repeat

LNW16 or LNW19B circuit packs.

Check off the appropriate box in

N D

........................................................................................................................................................

LNW18 (12TMUX) and LNW20 (48TMUXDS3EC1) installation (optional)

Follow this procedure only if installing LNW18 (12TMUX) or LNW20

(48TMUXDS3EC1) into the Alcatel-Lucent 1850 TSS-60 shelf.

Refer to the engineering job specification. Identify the proper function group(s) where

LNW18 or LNW20 will be installed.

Remove the LNW18 or LNW20 from the packing material.

Place the circuit pack into the shelf (slot D1 or G1 as required). Do NOT engage the

circuit pack in the backplane connector.

365-372-603R2.0

Issue 1 January 2009

Step

177D or LNW98 Apparatus Blanks are required in all unused slots D and G

Step 1

through

Step 6

T E P S

for each additional function group to be equipped with

"Installation checklist" (p.

Initial circuit pack installation

Step

5. If not, install a 177D or

I-6).

4 - 1 5

Table of Contents

Alcatel-Lucent 1850 TSS-60 Installation And System Turn-Up Manual page 157

Related Manuals for Alcatel-Lucent 1850 TSS-60

Related Products for Alcatel-Lucent 1850 TSS-60

Table of Contents