............................................................................................................................................................................................................................................................

Circuit pack installation procedure

Proceed as follows

Fully insert one or both (if two are equipped) M1 and M2 OC-3 OLIUs (LNW40,

LNW140, LNW601), OC-12 OLIUs (LNW38, LNW380, LNW51), OC-48 OLIUs

(LNW41) or OC-192 OLIUs (LNW141) into the shelf.

Note:

circuit pack into the slot until it is fully seated. Then close the faceplate latch and

tighten the retainer screw on the other end.

Note:

the center dividers removed. See

divider" (p. 2-7)

Fully seat LNW42 or LNW95 Apparatus Blanks in any unequipped Main slots. For

LNW140, LNW141 or LNW84 main OLIUs the center divider must be removed and in

the unused slot a LNW98 apparatus blanks installed to provide proper air flow for cooling.

Note:

circuit pack into the slot until it is fully seated. Then close the faceplate latch and

tighten the retainer screw on the other end.

If the LNW41 (OC-48), LNW141 (OC-192) or LNW84 (OC-3/OC-12/OC-48) mains are

being used, insert the PTMs at this time. Refer to

insertion.

Connect IN to OUT on the OLIU in the M1 slot of the Alcatel-Lucent 1850 TSS-60 shelf

using an optical fiber jumper cable and a 15-dB LBO. Refer to

cleaning"

365-372-603R2.0

Issue 1 January 2009

CAUTION

Equipment damage

The LNW38, LNW40, LNW51, LNW140, LNW380 and LNW601 OLIU circuit

packs are equipped with optics that do not meet GR-78 R9-3 requirements on

ESD susceptibility. Always use proper ESD procedures when handling these

OLIU circuit packs to avoid equipment damage.

Using a gentle steady pressure on both ends of the circuit pack, slide the

The LNW140, LNW141 and LNW84 require shelf comcode 849096334 with

to remove the dividers

Using a gentle steady pressure on both ends of the circuit pack, slide the

for proper fiber cleaning instructions.

Chapter

"Alcatel-Lucent 1850 TSS-60 center

Appendix C, "PTM modules"

Circuit pack installation

for proper

Appendix B, "Fiber

5 - 5

Table of Contents

Alcatel-Lucent 1850 TSS-60 Installation And System Turn-Up Manual page 185

Related Manuals for Alcatel-Lucent 1850 TSS-60

Related Products for Alcatel-Lucent 1850 TSS-60

Table of Contents