Table of Contents
Advertisement
Cable and fiber installation
............................................................................................................................................................................................................................................................
Modem cable installation
Description
The use of a modem will allow the Alcatel-Lucent 1850 TSS-60 to be accessed remotely
via dial up.
Note:
modem or a distribution frame (if specified in the order).
Procedure
Proceed as follows:
........................................................................................................................................................................................................................
1
Obtain the modem cable per
the RJ45 end of the modem cable to the MODEM port (J18) of Alcatel-Lucent 1850
TSS-60 shelf and route it to the left side of the shelf. (See
connection" (p.
Figure 3-13 Modem cable connection
........................................................................................................................................................................................................................
2
Route the modem cable out of the Alcatel-Lucent 1850 TSS-60 bay to the modem or
distribution frame.
........................................................................................................................................................................................................................
3
Dress and tie the modem cable to the Alcatel-Lucent 1850 TSS-60 backplane per
Figure 3-13, "Modem cable connection" (p.
........................................................................................................................................................................................................................
4
Connect the modem cable to the modem or distribution frame.
............................................................................................................................................................................................................................................................
3 - 5 0
Perform this procedure for the shelf which will be directly connected to a
Table 3-15, "Modem cable assemblies" (p.
3-50).
Figure 3-13, "Modem cable
3-50).
Modem cable installation
3-51). Connect
365-372-603R2.0
Issue 1 January 2009
Advertisement
Table of Contents
