Connecting Adjacent Network Elements Fiber Installation - Alcatel-Lucent 1850 TSS-60 Installation And System Turn-Up Manual

Connecting adjacent network elements
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
3
Use the Graphical User Interface (GUI) to enable the AGNE at ALU-TSS-60-1 only.
........................................................................................................................................................................................................................
4
Click on
........................................................................................................................................................................................................................
5 Set NE window
In the
•
•
........................................................................................................................................................................................................................
6
Use the
........................................................................................................................................................................................................................
7 GUI
In the
........................................................................................................................................................................................................................
8 Set NE window
In the
•
........................................................................................................................................................................................................................
9
Dress optical cables out of the shelf to the left side of the shelf.
Note:
allow the circuit packs in slots A1/B1 and A2/B2 to be inserted or removed.
........................................................................................................................................................................................................................
10
Route the optical jumpers from the left side of the shelf.
........................................................................................................................................................................................................................
11
Establish communications with the technician at the other end of the optical span.
............................................................................................................................................................................................................................................................
365-372-603R2.0
Issue 1 January 2009
Administration -> Set NE...
click on:
Remote NE Status: Enabled
AGNE: Enabled
GUI
to enable the Remote NE Status at all nodes.
screen for each NE click on
click on:
Remote NE Status: Enabled
Leave enough slack in the fibers to allow them to be moved higher or lower to
Administration -> Set NE...
Fiber installation
7 - 5