............................................................................................................................................................................................................................................................

To provision a port to DS3, from the GUI choose Configuration:Equipment Select the

DS3 port, click Select.

Choose Electrical Interface Type = DS3:Signal Format = Framed.

Apply

Click

Repeat

LNW19B circuit pack(s).

N D

........................................................................................................................................................

Transmission test

Perform the remaining steps in this procedure for all Function Groups equipped with

LNW16 (12DS3/EC1), LNW19B (48DS3/EC1) or LNW39/LNW391/LNW84

(DS1/DS3/16/3) circuit packs.

Set the DS3 test set to transmit and receive a framed Pseudo Random Bit Stream (PRBS)

DS3 test signal CBIT or M13 (M13 is default).

M13 should be used to test LNW39/LNW391/LNW84 (DS1/DS3/16/3).

Connect a cable from the DS3 test set transmit connection to the IN jack of the DSX-3

associated with the first DS3 tributary of the Alcatel-Lucent 1850 TSS-60 function unit

slot to be tested.

Connect a cable from the DS3 test set receive connection to the OUT jack of the DSX-3

associated with the first DS3 tributary of the Alcatel-Lucent 1850 TSS-60 function unit

slot to be tested.

Result:

DS3 pack.

Use the GUI command to enter cross-connects.

6 - 1 8

to issue the command.

Step 1

through

Step 5

T E P S

The DS3 test set should indicate a blue (AIS) signal is being received for a

for each Function Group equipped with LNW16 or

DS3/EC1 testing

365-372-603R2.0

Issue 1 January 2009

Table of Contents

Alcatel-Lucent 1850 TSS-60 Installation And System Turn-Up Manual page 212

Related Manuals for Alcatel-Lucent 1850 TSS-60

Related Products for Alcatel-Lucent 1850 TSS-60

Table of Contents