Power Connections On Alcatel-Lucent 1850 Tss-60 Backplane - Alcatel-Lucent 1850 TSS-60 Installation And System Turn-Up Manual

Transport service switch
Table of Contents

Advertisement

Circuit pack installation
............................................................................................................................................................................................................................................................
Figure 4-1 Power connections on Alcatel-Lucent 1850 TSS-60 backplane
........................................................................................................................................................................................................................
4
If fuses are being used, install 25-ampere fuses in the battery distribution fuse board
(BDFB) that powers the Alcatel-Lucent 1850 TSS-60 A and B feeders.
........................................................................................................................................................................................................................
5
If breakers are being used, verify that 25-ampere breakers are installed and switch the
breakers to the ON position for the Alcatel-Lucent 1850 TSS-60 A and B feeders.
........................................................................................................................................................................................................................
6
At the Alcatel-Lucent 1850 TSS-60 power cable connector, use a voltmeter and measure
the voltage on the power cable between BAT A and BAT A RTN. Then measure the
voltage between BAT B and BAT B RTN.
Designation
BAT A
BAT A RTN
BAT B
BAT B RTN
Requirement: The voltage MUST be between -40.00 and -60.0 V DC.
............................................................................................................................................................................................................................................................
4 - 4
Color of
Color of
power
internal
cable
shelf cable
Red
Red
Red/Black
Blue
Red
Red/Black
Position on power cable
connector facing connector
with clip release up
Right
Left
Right
Left
Powering
365-372-603R2.0
Issue 1 January 2009

Advertisement

Table of Contents
loading

Table of Contents