............................................................................................................................................................................................................................................................

Log out of the Alcatel-Lucent 1850 TSS-60 shelf.

Repeat this procedure starting at

RJ45 patch panel connected to the LNW66 under test, then continue on to

Disconnect the PC from the RJ45 patch panel and the Alcatel-Lucent 1850 TSS-60 LAN

port from the RJ45 patch panel.

If not still connected from the previous procedure. Connect the Front CIT cable between

the PC and the CIT/RS 232 jack of System Controller and login to the shelf using the

serial connection.

Select

Result:

on the Alcatel-Lucent 1850 TSS-60 shelf will also clear.

Select

Choose the LNW66 circuit pack and click Select.

Select the VRTSW ID and click Apply.

Log out and disconnect the PC from the Alcatel-Lucent 1850 TSS-60 serial port.

Repeat this procedure for every slot containing and LNW66.

Check off the appropriate box in

N D

........................................................................................................................................................

365-372-603R2.0

Issue 1 January 2009

Configuration -> Update System... -> Update All

The flashing fault LED on the Ethernet circuit pack will clear and any alarms

Configuration -> Data -> Delete Virtual Switch

T E P S

Step 13

for the remaining Ethernet connections on the

"Installation checklist" (p.

LNW74 and LNW66 testing

Step

II-5).

19.

6 - 2 7

Table of Contents

Alcatel-Lucent 1850 TSS-60 Installation And System Turn-Up Manual page 221

Related Manuals for Alcatel-Lucent 1850 TSS-60

Related Products for Alcatel-Lucent 1850 TSS-60

Table of Contents