Table of Contents
Advertisement
8
WDMX setup and testing:
integration procedures
Overview
Purpose
This chapter is used to verify WDMX connectivity between Alcatel-Lucent 1850
Transport Service Switch 60 (TSS-60) nodes. The chapter includes the LNW785 8
channel Optical Multiplexer Demultiplexer (OMD) circuit pack. It is not intended to
replace acceptance test procedures.
The testing performed in this procedure uses an OC-48 test set. If the OC48 PTM and test
sets are unavailable, other rates or signals can be substituted, i.e OC-3/-12 or GigE. If
additional provisioning procedures are desired, refer to Alcatel-Lucent 1850 Transport
Service Switch (TSS-60), Release 2.0 User Operations Guide, 365-372-601R2.0 and
Alcatel-Lucent 1850 Transport Service Switch (TSS-60), Release 2.0 Maintenance and
Trouble-Clearing Guide 365-372-602R2.0 for detailed troubleshooting procedures.
Contents
This chapter provides information on the following topics:
Turn-up and test the LNW785 8 channel OMD
Connecting the ring (Mains) to the WDMX
Removing provisioning and equipage from the LNW785
............................................................................................................................................................................................................................................................
365-372-603R2.0
Issue 1 January 2009
8-4
8-6
8-9
8 - 1
Advertisement
Table of Contents
