Table of Contents
Advertisement
PTM installation
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
6
Before inserting the module, the latch must be in the closed position. With the dust plug in
place, the latch is in the closed position. Remove the dust plug momentarily to open the
latch. Move the latch to the left (away from the gold fingers) to open the latch.
Figure C-3 Latch type 3
........................................................................................................................................................................................................................
7
Proceed to
........................................................................................................................................................................................................................
8
Before inserting the module, the latch must be in the closed position. With the dust plug in
place, the latch is in the closed position. Remove the dust plug momentarily to open the
latch. Move the latch to the right (towards the gold fingers) to open the latch.
Figure C-4 Latch type 4
........................................................................................................................................................................................................................
9
With your left hand, hold the optical module by the dust plug. The optical ports are in your
left hand and the gold fingers are visible (facing you). (Do not insert optical module).
........................................................................................................................................................................................................................
10
Rotate the optical module 45 degrees counter-clockwise. The dust plug is facing you and
the gold fingers are pointed to the right. (Do not insert optical module.)
............................................................................................................................................................................................................................................................
C - 8
Step
9.
Install pluggable modules
365-372-603R2.0
Issue 1 January 2009
Advertisement
Table of Contents
