Connecting Chassis To Power Source; Ac Power Supply Connections; Powering On A Chassis - Alcatel-Lucent OmniSwitch 6450 Series Hardware User's Manual

Mounting OmniSwitch 6450 Series Switches

Connecting Chassis to Power Source

AC Power Supply Connections

Since the power cord is the switch's only disconnect device, it should be plugged into an easily accessible
outlet. In the event that your power cord is lost or damaged, refer to the specifications below.

Powering On a Chassis

Follow the steps below to power on the chassis using and AC power source:
1
Connect the IEC-60320-C15 end of the supplied power cord to the chassis.
2
Connect power supply to AC power source.
3
Monitor the chassis as it boots.
OmniSwitch 6450 Series Hardware Users Guide November 2011
Connecting Chassis to Power Source
page 3-13