Manage Results On A Flash Drive - Fluke Versiv User Manual

To move results to a different project
On the MANAGE RESULTS screen, select the results you want
1
to move.
Tap MOVE.
2
To move the results to a project shown in the list, tap the

project name, then tap MOVE in the confirmation dialog.
To make a new project and move the results to the new

project, tap NEW PROJECT, enter a project name, tap
DONE, then tap MOVE in the confirmation dialog.
When you move results to a different project, that
project becomes the active project.

Manage Results on a Flash Drive

You can export or import results to or from a flash drive, and
delete results on the flash drive.
To export or import project settings along with results, see
"Manage Projects on a Flash Drive" on page 218.

Do not remove the USB flash drive while the LED on
the drive flashes. Doing so can corrupt the data on
the drive.

You can lose a USB flash drive, cause damage to it,
or accidentally erase the contents of the drive. Thus,
Fluke Networks recommends that you save no more
than one day of test results on a flash drive.
The tester reads only USB drives that use the FAT
format.
Connect a USB flash drive to the type A USB port. The tester
1
makes a bell sound when it detects the drive.
Chapter 10: Manage Test Results
Manage Results on a Flash Drive
Note

Caution
Note
207