Versiv Series Cabling Certification Product Family
Users Manual
Editing Events in Bi-directional Results
Other Options for Editing Events
304
Find Quality Products Online at:
When you edit an event in a bi-directional result, the tester copies
your change to the result you got from the other end and to the
averaged result. The tester copies your change to these events:
•
Loss
•
Reflection
•
Gainer
•
Ghost Source
•
Hidden
In some situations, the tester will not copy your change:
The tester will not copy your change to events not listed
•
above, such as Launch, Tail, and Bend events.
The tester will not copy your change if it did not calculate
•
averaged bi-directional results. This can occur, for example, if
you did the End 1 and End 2 tests with different wavelengths
or if a span was defined when you did the test.
The tester will not copy your change to the results from the
•
other end if there was not an event at the correct location.
But the change will show in the averaged results.
Use LinkWare PC to make these edits to events:
Change an event to a splice, APC connector, or splitter.
•
Add a 0 dB event to a trace where a splice or APC connector is
•
present but has very low loss and does not show in the event
table.
Add a note to any event.
•
GlobalTestSupply
www.
.com
sales@GlobalTestSupply.com