A7 Sw Cont Assy (Fru No. 706) - GE LOGIQ 500 Service Manual

GE MEDICAL SYSTEMS
REV 14
6–2–88 A7 SW Cont Assy (FRU No. 706)
Time Required
30 Minutes
Tool Required
Screwdriver
Hexagonal Wrench (Key Size: 3 mm)
Procedure
Refer to ILLUSTRATION 6–118 on page 6–209.
1. Turn OFF the system.
2. Remove the Front Base Cover (FRU 307). Refer to 6–2–26 on page 6–103.
3. Remove the Side Cover Right (FRU 302). Refer to 6–2–21 on page 6–98.
4. Remove the PS Cover Right. Refer to 6–2–83 on page 6–198.
Unscrew one hexagonal bolt ( 1 ).
5.
Pull the SW Cont Assy outwards and disconnect four connectors ( 2 – 5 ).
6.
6–208
LOGIQ 500 SERVICE MANUAL
P9030TA
RENEWAL PARTS