(B) Error Log Display - GE LOGIQ 500 Service Manual

GE MEDICAL SYSTEMS
REV 10
4–3–3 Utility Menu (Continued)

(B) ERROR LOG DISPLAY

This loads and displays an error log file, or saves it into a Floppy disk for the console with software version 1.20 or
former or into a MO disk for the console with software version 2.00 or later.
Type 2 and then press Return key when the Utility Menu is displayed. The Error Log Display is displayed as
shown in ILLUSTRATION 4–14.
Procedure for Saving File
1. Type Y and then press Return key.
2. Insert a floppy disk into the FD drive and press any key in the case of system software version 1.20 or former
console.
Insert an 128MB MO (Magneto Optical) disk into the MOD drive and press any key in the case of system soft-
ware version 2.00 or later console.
The 230MB MO disk is available on the console with software version 3.10 or later.
During the time that the system is saving the error log file, "Copying now" is displayed on the CRT monitor.
ERROR LOG FILE DISPLAY
ILLUSTRATION 4–14
Note
4–17
LOGIQ 500 SERVICE MANUAL
P9030TA
FUNCTIONAL CHECKS