(J) System Id Entry/Display - GE LOGIQ 500 Service Manual

GE MEDICAL SYSTEMS
REV 11
4–3–3 Utility Menu (continued)
(J) SYSTEM ID ENTRY/DISPLAY
This displays the current system ID number and set the new one.
This function can be used on the consoles being installed the system software version 2.00 or later.
Type 10 and then press Return key when the Utility Menu is displayed. The System ID Entry/Display menu is
displayed as shown in ILLUSTRATION 4–23.
Note
SYSTEM ID ENTRY/DISPLAY
ILLUSTRATION 4–23
4–31
LOGIQ 500 SERVICE MANUAL
P9030TA
FUNCTIONAL CHECKS