(H) Modem Set Up - GE LOGIQ 500 Service Manual

GE MEDICAL SYSTEMS
REV 11
4–3–3 Utility Menu (continued)

(H) MODEM SET UP

This displays and changes the current settings for the modem.
Type 8 and then press Return key when the Utility Menu is displayed. The Modem Set Up is displayed as shown
in ILLUSTRATION 4–21.
Procedure for Changing Each Settings
1. Input the item number you desire to change the settings. The choices for the selected item are displayed.
2. Type the appropriate number and press the Return key.
This function is valid only when the USrobotics modem is selected by the option setting function of the
service software. If the Motolora modem is selected, the message "This function is not available." is
displayed on the CRT monitor screen.
MODEM SET UP
ILLUSTRATION 4–21
Note
4–29
LOGIQ 500 SERVICE MANUAL
P9030TA
FUNCTIONAL CHECKS