(I) Media Initialize - GE LOGIQ 500 Service Manual

GE MEDICAL SYSTEMS
REV 12
4–3–3 Utility Menu (continued)

(I) MEDIA INITIALIZE

This initialize the floppy disk.
Type 9 and then press Return key when the Utility Menu is displayed. The Media Initialize screen is displayed as
shown in ILLUSTRATION 4–22.
Procedure for Initializing Media
Set a floppy disk into the FD drive and press the Return key in the case of system software version 1.20 or former
console.
Set an 128MB MO disk into the MOD drive and press the Return key in the case of system software version 2.00
or later console.
The system automatically starts initializing the disk.
The 230MB MO disk is available on the console with software version 3.10 or later.
During the system is initializing the floppy disk, "Initializing" is displayed on the CRT monitor. After initializing,
"Succeeded" or "Failed" is displayed on the CRT monitor. Then, "Press Y to continue, Control + R to quit" is dis-
played. Type Y and press Enter to continue to use this function. Press and hold Control, and press R to quit this
function.
MEDIA INITIALIZATION
ILLUSTRATION 4–22
Note
4–30
LOGIQ 500 SERVICE MANUAL
P9030TA
FUNCTIONAL CHECKS