Rear 3 Assy (Fru No. 590) - GE LOGIQ 500 Service Manual

GE MEDICAL SYSTEMS
REV 14
6–2–56 Rear 3 Assy (FRU No. 590)
Time Required
1 Hours
Tool Required
Screwdriver
Procedure
Refer to ILLUSTRATION 6–72.
1. Turn OFF the system.
2. Remove the Rear CONN Panel2 Assy (FRU 501B). Refer to 6–2–53 on page 6–138.
Disconnect one connector ( 1 ) from the Rear3 Assy as shown in ILLUSTRATION 6–72.
3.
Unscrew thirteen screws ( 2 – 14 ). Refer to ILLUSTRATION 6–72.
4.
5. Remove the Rear 3 Assy.
REAR 3 ASSY DISASSEMBLY
ILLUSTRATION 6–72
6–144
LOGIQ 500 SERVICE MANUAL
P9030TA
RENEWAL PARTS